Flex Seal Liquid Rubber Sealent Coating 16 Oz (473ml) In A Can
Black / White Color
FLEX SEAL LIQUID ® is actually liquid rubberized coating in a can! Similar to our Flex Seal Spray, but now you can brush it, roll it, dip it or pour it anywhere you need a watertight, flexible coating or sealant. Our patent pending, proprietary formulation starts out as a thick liquid and dries to a super strong and flexible, watertight, rubberized coating that protects and helps stop leaks fast.
Forms a durable, breathable, weatherproof, non-slip barrier
Resistant to rain, snow, sun, wind, hail, air, moisture, UV degradation, extreme temperatures and natural weathering
Blocks out air, water, and moisture
Prevents rust and corrosion
Mildew and chemical resistant
Safe around plants and animals*
FLEX SEAL LIQUID® can be used for a variety of coating and sealant applications. The most common uses for our Flex Seal Liquid are listed below:
Common Flex Seal Liquid Applications:
Roof and gutter repairs
Ponds and bird bath assembly and repairs
Basements and foundations
Tools and sporting equipment upgrades and repairs
Cars, trucks and vans
Campers and trailers
Boats and watersports equipment
DIY projects, crafting, and hobbies
Protective clothing is recommended prior to starting any projects.
Make sure the surface is clean, dry and free of grease, oil and dirt.
Increase adhesion by etching surface with sand paper.
You can either brush, roll, dip or pour Flex Seal Liquid directly onto surface.
Allow each coat to dry completely (24 to 48 hours) before adding additional coats.
Flex Seal Liquid fully cures in 48 hours.
Tips for Brushing/Rolling Applications
Brush or roll Flex Seal Liquid using an even sweeping motion.
Apply several even coats until the surface has been completely covered and ALL cracks and holes have been filled.
Always brush or roll over a larger area than just where the leak occurred.
Tips for Dipping Applications
Dip object into Flex Seal Liquid, making a slight swirling motion.
Once you feel the surface has been fully coated, remove and let any excess liquid drip back into the can.
Hang or clip object in the same vertical position as it came out of the can and let dry.
Once fully cured, you will have a super strong, no slip, rubberized coating on the surface.
Tips for Pouring Applications
Pour Flex Seal Liquid directly on the surface, allowing gravity to take the liquid into cracks, holes, and/or other hard-to-reach areas.
Continue to pour until the surface has been covered and all cracks and/or holes have been filled completely.
Allow at least 48 hours for liquid to fully cure.
WARNING: Avoid contact with eyes and skin. Gloves and safety glasses are recommended. KEEP OUT OF REACH OF CHILDREN.
1 x Flex Seal Liquid Rubber Sealent Coating Black Color 16 Oz (473ml) In A Can